路东柱----中国科学院海洋研究所

海洋腐蚀与防护

路东柱，男，副研究员，从事海洋材料、金属材料海洋腐蚀与防护研究。2014年毕业于中国科学院金属研究所，获工学博士学位。2004-2010年在东北大学材料与冶金学院本硕连读，获工学硕士学位。国家自然科学基金委项目评审专家，中国表面工程协会行业专家，山东省腐蚀与防护学会理事，《中国腐蚀与防护学报》、《材料保护》等刊青年编委。《中国腐蚀成本》专著主要编写者之一。

一、研究领域

1. 金属表面微观粒子受热激活扩渗传输机制及其效应

2. 海洋环境下金属表面腐蚀产物与材料性能相互作用

3. 海洋源生材料在海洋关键器件的示范应用基础研究

二、招生专业及方向

1. 海洋金属腐蚀与防护

2. 海洋电化学

3. 海洋环境工程

三、研究室及联系方式

海洋关键材料全国重点实验室

中国科学院海洋研究所海洋环境腐蚀与生物污损重点实验室

联系方式：ldz@qdio.ac.cn

四、承担的主要科研项目

1.国家自然科学基金面上项目，No.42376209，2024.01-2027.12，主持

2.山东省自然科学基金面上项目，No.ZR2023ME056，2024.01-2026.12，主持

五、研究成果及奖励

1.中国表面工程协会科学技术贡献奖，2024

2.中国精品科技期刊顶尖学术论文，2023

3.山东省腐蚀与防护学会科学技术奖青年创新人才奖，2023

六、代表性论文及著作

代表性论文

1. Gao, Wenke, Dongzhu Lu*, Huachuan Wang, Quantong Jiang, Jiawei Li, Chaoqun Li, and Yanliang Huang. 2025. “The Development and Utilization of Ecofriendly and High-Performance Materials in the Marine Environment.” Advanced Engineering Materials 27 (15). https://doi.org/10.1002/adem.202500149.

2. Li, Jiawei, Dongzhu Lu*, Quantong Jiang, Wenke Gao, Chaoqun Li, Qichao Zhang, Yishan Jiang, Yanliang Huang, and Baorong Hou. 2025. “The Effect of Surface Roughness on the Formation of Passivation Layer on the A356 Aluminum Alloy.” Journal of Materials Research and Technology 38:3100–3113. https://doi.org/10.1016/j.jmrt.2025.08.136.

3. Zhang, Ruiqi, Liang Fan*, and Dongzhu Lu*. 2025. “Research on Self-Diagnosis and Self-Healing Technologies for Intelligent Fiber Optic Sensing Networks.” Sensors 25 (6). https://doi.org/10.3390/s25061641.

4. Li, Jia Wei, Dongzhu Lu*, Yu Ping Wang, Ting Ting Li, Yan Liang Huang, and Bao Rong Hou. 2023. “Corrosion of the Aluminum Alloy Wheel Hub in Typical Atmospheric Environments and the Prevention Methods.” Cailiao Baohu/Materials Protection 56 (5): 180-190+211. https://doi.org/10.16577/j.issn.1001-1560.2023.0122.

5. Lu, Dongzhu, Quantong Jiang, Yishan Jiang, Jiawei Li, Qichao Zhang, Yanliang Huang, and Baorong Hou. 2023. “Influencing Factors for the Migration of Zinc Ions in Metal Oxide Powders.” Journal of Materials Research and Technology 24 (May):1638–52. https://doi.org/10.1016/j.jmrt.2023.03.106.

6. 路东柱, 赵霞, 高昌, 翟晓凡, 管方, 郑萌, 麻福斌, and 侯保荣. 2023. “钢结构及其连接部位包覆防腐蚀技术的应用实践.” 材料保护 56 (01): 163-174+183. https://doi.org/10.16577/j.issn.1001-1560.2023.0024.

7. 路东柱, 蒋全通, 李家威, 马秀敏, 樊亮, 黄彦良, and 侯保荣. 2023. “镁合金表面热扩渗金属防护层的制备与性能.” 材料保护 56 (01): 134-145+162. https://doi.org/10.16577/j.issn.1001-1560.2023.0021.

8. Lu, Dongzhu, Quantong Jiang, Xiumin Ma, Liang Fan, Yanliang Huang, and Baorong Hou. 2023. “Effective Time of a Diffusion Source in a Pack Cementation Process on the AZ91D Magnesium Alloy.” Journal of Materials Research and Technology 24 (May):5552–62. https://doi.org/10.1016/j.jmrt.2023.04.134.

9. Li, Jiawei, Dongzhu Lu*, Li Wang, Hao Huang, Haifeng Liu, Quantong Jiang, Yanliang Huang, and Baorong Hou. 2023. “Study on Filiform Corrosion of A356 Aluminum Alloy under an Organic Coating.” Journal of Materials Research and Technology 26 (September):8124–35. https://doi.org/10.1016/j.jmrt.2023.09.138.

10. Lu, Dongzhu, Quantong Jiang, Xiumin Ma, Qichao Zhang, Xiaole Fu, and Liang Fan. 2022. “Defect-Related Etch Pits on Crystals and Their Utilization.” Crystals 12 (11): 1549. https://doi.org/10.3390/cryst12111549.

11. Lu, Dongzhu, Quantong Jiang, Xiumin Ma, Liang Fan, Yanliang Huang, and Baorong Hou. 2022. “Zinc Chloride Hydroxide - A Recyclable Diffusion Source for Fabrication of Zinc Rich Coatings on Magnesium Alloys.” Journal of Cleaner Production 344 (December 2021): 131066. https://doi.org/10.1016/j.jclepro.2022.131066.

12. Xu, Yong, Yanliang Huang*, Fanfan Cai, Dongzhu Lu*, Zhengquan Wang, and Xiutong Wang. 2022. “Study on Corrosion, Hydrogen Permeation, and Stress Corrosion Cracking Behaviours of AISI 4135 Steel in the Tidal Zone.” Npj Materials Degradation 6 (1): 96. https://doi.org/10.1038/s41529-022-00309-2.

13. Xu, Yong, Yanliang Huang*, Fanfan Cai, Dongzhu Lu*, and Xiutong Wang. 2022. “Study on Corrosion Behavior and Mechanism of AISI 4135 Steel in Marine Environments Based on Field Exposure Experiment.” Science of the Total Environment 830 (July):154864. https://doi.org/10.1016/j.scitotenv.2022.154864.

14. Zhang, Qichao, Yishan Jiang, Xin Zhao, Penglei Song, Tingting Kuang, Juna Chen, Zhongtao Sun, Dongzhu Lu* et al. 2022. “Hydrogen Permeation Behavior of Carbon Steel During Corrosion in Highly Pressed Saturated Bentonite.” Frontiers in Materials 9. https://doi.org/10.3389/fmats.2022.848123.

15. Chen, Liangyuan, Dongzhu Lu*, and Yanhu Zhang. 2022. “Organic Compounds as Corrosion Inhibitors for Carbon Steel in HCl Solution: A Comprehensive Review.” Materials 15 (6). https://doi.org/10.3390/ma15062023.

16. Lu, Dongzhu, Quantong Jiang, Xiumin Ma, Kuikui Wang, Xiaole Fu, Yanliang Huang, and Baorong Hou. 2021. “Characterization of Zn in a Polycrystalline MgO Film.” Materials Characterization 173 (February): 110955. https://doi.org/10.1016/j.matchar.2021.110955.

17. Lu, Dongzhu, Xiumin Ma, Yanliang Huang, Fubin Ma, Jizhou Duan, and Baorong Hou. 2019. “Surface Alloying of a Magnesium Alloy with Zinc Oxide by Taking Advantage of the Permeability of the Magnesium Oxide Film.” Research-article. The Journal of Physical Chemistry C 123:24461–68. https://doi.org/10.1021/acs.jpcc.9b03839.

18. Lu, Dongzhu, Yanliang Huang, Jizhou Duan, and Baorong Hou. 2019. “A Zinc-Rich Coating Fabricated on a Magnesium Alloy by Oxide Reduction.” Coatings 9 (4): 278. https://doi.org/10.3390/COATINGS9040278.

19. Lu, Dongzhu, Yanliang Huang, Quantong Jiang, Meng Zheng, Jizhou Duan, and Baorong Hou. 2019. “An Approach to Fabricating Protective Coatings on a Magnesium Alloy Utilising Alumina.” Surface and Coatings Technology 367 (April): 336–40. https://doi.org/10.1016/j.surfcoat.2019.04.016.

20. Lu, Dongzhu, Quantong Jiang, Meng Zheng, Jie Zhang, Yanliang Huang, and Baorong Hou. 2019. “The Role of Ammonium Chloride in the Powder Thermal Diffusion Alloying Process on a Magnesium Alloy.” Coatings 9 (4): 252. https://doi.org/10.3390/coatings9040252.

21. 侯保荣, 路东柱. 2018. “我国腐蚀成本及其防控策略.” 中国科学院院刊 33 (6): 601–7. https://doi.org/10.16418/j.issn.1000-3045.2018.06.008.

22. Lu, Dongzhu, Qichao Zhang, Xiutong Wang, Lihui Yang, Xiumin Ma, Wencheng Wang, and Yanliang Huang. 2017. “Intermetallic Layer Obtained by the Compact Powder Diffusion Alloying Method on AZ91D Magnesium Alloy in Air.” Surface and Coatings Technology 309:986–93. https://doi.org/10.1016/j.surfcoat.2016.10.048.

23. Lu, Dongzhu, Qichao Zhang, Wencheng Wang, Fang Guan, Xiumin Ma, Lihui Yang, Xiutong Wang, Yanliang Huang, and Baorong Hou. 2017. “Effect of Cooling Rate and the Original Matrix on the Thermal Diffusion Alloyed Intermetallic Layer on Magnesium Alloys.” Materials and Design 120. https://doi.org/10.1016/j.matdes.2017.02.006.

24. Du, Hao, Dongzhu Lu, Jianzhong Qi, Yanfang Shen, Lisong Yin, Yuan Wang, Zhongguang Zheng, and Tianying Xiong. 2014. “Heat Dissipation Performance of Porous Copper with Elongated Cylindrical Pores.” Journal of Materials Science & Technology 30 (9): 934–38. https://doi.org/10.1016/j.jmst.2014.03.014.

25. Du, Hao, Dong Zhu Lu, Hideo Nakajima, Yuan Wang, Li Song Yin, and Tian Ying Xiong. 2015. Structure and Mechanical Properties of Lotus-Type Porous Copper with a Ti Coating on the Pore Wall by Arc Ion Plating. Materials Science Forum. Vol. 804. https://doi.org/10.4028/www.scientific.net/MSF.804.263.

26. Lu, Dong Zhu, and Min Jie Wu. 2014. “Observation of Etch Pits in Fe-36wt%Ni Invar Alloy.” International Journal of Minerals, Metallurgy and Materials 21 (7): 682–86. https://doi.org/10.1007/s12613-014-0958-x.

27. 路东柱,吴敏杰. 2014. “原位TiC颗粒增强Fe-36Ni因瓦合金的组织与性能.” 金属功能材料 21 (4): 9–13.

28. Zheng, Shu guo, Miao yong Zhu, and Dong zhu Lu. 2011. Water Modeling of Optimization of Two-Strand Tundish Configuration for Slab Continuous Casting with Gas Bubbling. Supplemental Proceedings: General Paper Selections. Vol. 3. https://doi.org/10.1002/9781118062173.ch97.

代表性著作：

1. 高强度钢浪花飞溅区氢渗透行为及其抑制, 黄彦良, 路东柱, 曲文娟等著, 科学出版社, 2016年01月。