付俊伟，男，研究员，2003年毕业于合肥工业大学，获得学士学位；2009年获哈尔滨工业大学工学博士学位。2017.10-2018.10在Brunel University 访学。一直致力于金属材料的组织及性能控制、高性能金属材料的设计及制备等研究工作。采用SEM和EBSD原位结合技术，首次将材料的织构（或者取向）与其腐蚀性能联系起来，为金属材料腐蚀性能控制或者设计提供了一种全新的方法；提出了一种采用极图判定材料织构类型的通用技术，适用于7大晶系；建立了脉冲磁场下枝晶球化的数学模型，该模型预测结果与X射线同步辐射原位观察结果完全一致；采用定向凝固和液淬技术，澄清了凝固过程中304不锈钢三相转变机制为包晶而非共晶转变，并提供了实验证据。

目前，担任《Advanced Powder Materials》、《中国有色金属学报》（中、英文版）、《特种铸造及有色合金》、《中国腐蚀与防护学报》的青年编委。主持国家自然科学基金面上项目、青年项目等多项国家级项目。目前发表SCI/EI论文50余篇，其中第一作者在Journal of Crystal Growth, Journal of Materials Processing Technology, Journal of Alloys and Compounds, Journal of Materials Research, Journal of Electroanalytical Chemistry, Materials Science and Engineering A, Materials Characterization, Materials Letters等国际期刊发表SCI论文28篇。第一发明人授权发明专利2项。

一、研究领域 

（1） 金属材料的腐蚀原理及防护技术

（2） 高性能金属材料的设计及制备

（3） 金属材料的组织及性能控制

二、招生专业及方向

（1）海洋腐蚀与防护，海洋金属腐蚀与防护

（2）资源与环境，海洋环境工程

三、研究室及联系方式

中国科学院海洋环境腐蚀与生物污损重点实验室

联系方式：fujw@qdio.ac.cn

办公电话：0532-82898851

四、承担的主要科研项目

 （1）铁素体不锈钢中TiN的凝固析出行为及性能控制研究，主持，国家自然科学基金面上项目，2016-1至2019-12；

（2）奥氏体不锈钢凝固组织中铁素体形成机制及演化规律研究，主持，国家自然科学基金青年项目，2011-1至2013-12；

（3）高性能金属材料设计与制备，主持，中国科学院海洋研究所启动经费，2021-12至2025-12；

（4）低压脉冲磁场凝固的基础研究, 参与, 国家自然科学基金重点项目,2011-1至2014-12；

（5）高能超声制备 CNTs/Mg 复合材料性的过程和机理研究, 主持, 国家自然科学基金面上项目, 2013-1至2016-12。

五、研究成果及奖励        

优秀毕业设计（论文）指导导师，2014年；

优秀毕业设计（论文）指导教师，2016年。

六、代表性论文及著作

(1) Junwei Fu*, Jiangchun Wang. Effect of Al content on the thermal conductivity and corrosion resistance of die steel. Journal of Materials Engineering and Performance. 2022, 31(3): 2112-2120.

(2) Junwei Fu*, Kai Cui. Effect of Mn content on the microstructure and corrosion resistance of Al-Cu-Mg-Mn alloys. Journal of Alloys and Compounds. 2022, 896: 162903.

(3) Junwei Fu*, Jiangchun Wang. Effect of Mo content on the thermal conductivity and corrosion resistance of die steel. Journal of Materials Engineering and Performance. 2021, 30(11): 8438-8446.

(4) Junwei Fu*. A general approach to determine texture patterns using pole figure. Journal of Materials Research and Technology. 2021, 14:1284-1291.

(5) Junwei Fu*, Kai Cui, Feng Li, Yucheng Wu. Effect of Ti on the corrosion behavior of as-cast Fe-17Cr ferritic stainless steel. Corrosion Engineering, Science and Technology. 2021, 56(3): 244-253.

(6) Junwei Fu*, Jiangchun Wang, Feng Li, Kai Cui, Xiaodong Du, Yucheng Wu. Effect of Nb addition on the microstructure and corrosion resistance of ferritic stainless steel. Applied Physics A. 2020,126 (3): 194.

(7) Junwei Fu*, Kai Cui, Feng Li, Jiangchun Wang, Yucheng Wu. Texture and anisotropic mechanical properties of ferritic stainless steel stabilized with Ti and Nb. Materials Characterization. 2020, 159: 110027.

(8) Junwei Fu*, Feng Li, Jiajun Sun, Kai Cui, Xiaodong Du, Yucheng Wu. Effect of crystallographic orientations on the corrosion resistance of Fe-17Cr ferritic stainless steel. Journal of Electroanalytical Chemistry. 2019, 841: 56-62.

(9) Junwei Fu*, Feng Li, Jiajun Sun, Yucheng Wu. Texture, orientation, and mechanical properties of Ti-stabilized Fe-17Cr ferritic stainless steels. Materials Science and Engineering A. 2018, 738: 335-343.

(10) Junwei Fu*, Jiajun Sun, Xi Cen, Xinming Zhang, Feng Li, Yucheng Wu. Growth behavior and orientation relationships in AISI 304 stainless steel during directional solidification. Materials Characterization. 2018, 139: 241-248.

(11) Junwei Fu*, Qiangqiang Nie, Wenxiu Qiu, Jiajun Sun, Feng Li, Yucheng Wu. Crystallography and growth mechanism of TiN in Fe-17Cr stainless steel during solidification. Journal of Materials Processing Technology. 2018, 253: 43-50.

(12) Junwei Fu*, Qiangqiang Nie, Wenxiu Qiu, Jiaqin Liu, Yucheng Wu. Morphology, orientation relationships and formation mechanism of TiN in Fe-17Cr steel during solidification. Materials Characterization. 2017, 133: 176-184.

(13) Junwei Fu*, Wenxiu Qiu, Qiangqiang Nie, Yucheng Wu. Precipitation of TiN during solidification of AISI 439 stainless steel. Journal of Alloys and Compounds. 2017, 699: 938-946.

(14) Junwei Fu*. Microstructure and corrosion behavior of hot-rolled GCr15 bearing steel. Applied Physics A. 2016, 122(4):416.

(15) Junwei Fu*, Yuansheng Yang. Origin of the lathy ferrite in AISI 304 stainless steel during directional solidification. Journal of Alloys and Compounds. 2013, 580:191-194.

(16) Junwei Fu*, Yuansheng Yang. Crystallography and morphology of a lathy ferrite in Fe-Cr-Ni alloys during directional solidification. Journal of Materials Research. 2013, 28(15):2040-2046.

(17) Junwei Fu, Yuansheng Yang*. Solidification behavior in three-phase region of AISI 304 stainless steel. Materials Letters. 2013, 93:18-20.

(18) Junwei Fu, Yuansheng Yang*. Orientational dependence of lathy ferrite in Fe-Cr-Ni alloy during directional solidification. Materials Letters. 2012, 81:177-180.

(19) Junwei Fu, Yuansheng Yang*. Microstructure and mechanical properties of Mg-Al-Zn alloy under a low-voltage pulsed magnetic field. Materials Letters. 2012, 67:252-255.

(20) Junwei Fu, Yuansheng Yang*. Formation of the solidified microstructure of Mg-Al-Zn alloy under a low-voltage pulsed magnetic field. Journal of Materials Research. 2011, 26(14):1688-1695.

(21) Junwei Fu, Yuansheng Yang*. Formation of the solidified microstructure in Mg-Sn binary alloy. Journal of Crystal Growth. 2011, 322(1):84-90.

(22) Junwei Fu, Yuansheng Yang*, Jingjie Guo, Jianchao Ma, Wenhui Tong. Microstructure evolution in AISI 304 stainless steel during near-rapid directional solidification. Materials Science and Technology. 2009, 25(8):1013-1016.

(23) Junwei Fu, Yuansheng Yang*, Jingjie Guo. Formation of a blocky ferrite in Fe-Cr-Ni alloy during directional solidification. Journal of Crystal Growth. 2009, 311(14):3661-3666.

(24) Junwei Fu, Yuansheng Yang*, Jingjie Guo, Jianchao Ma, Wenhui Tong. Formation of the two-phase coupled microstructure in Fe-Cr-Ni alloy during directional solidification. Journal of Materials Research. 2009, 24(7):2385-2390.

(25) Junwei Fu, Yuansheng Yang*, Jingjie Guo, Jianchao Ma, Wenhui Tong. Formation of a two-phase microstructure in Fe-Cr-Ni alloy during directional solidification. Journal of Crystal Growth. 2008, 311(1):132-136.